Feature

●Features: Power Tube: Power Tube: 2 oz on both sides, stable performance, large radiator, fast cooling
●Ceramic chip with silver layer is not high temperature, when the temperature of iron in the welding power wire should not exceed 280 degrees, heat the most commonly used iron, iron temperature is set to 250 degrees. 5. Shock head large side can be glued to clean the pelvic floor and the laundry pot must be well ground up. 6. Shock head or transducer ceramic adhesive applicator head. The impact will stick firmly to the pelvic floor cleaning
●4. Transducer film on ceramic sheet is covered with silver layer on negative side, the other side of the two large silver layers positive, the negative side is small, the welding power cord needs to be welded on the silver side, if there are two layers, the opposite side of the vibration surface can be attached to the bidet (this is available in the assembly instructions for ceramic patch transducer)
●Shock Head Circuit Board (Ceramic Transducer) Wiring Instructions: 1. Board can not load electricity. 2. Cleaning fluid cannot be used to clean electricity. 3. Hook the first two tabs and add the two ceramic central lugs to the top and bottom metal columns to negative, can not be flipped
●7.Two impact head and circuit board terminals, circuit boards with up to two impact heads, support the use of the shock head. 8. Circuit board wiring diagram is as follows: In conjunction with childrens shock, positive and negative, each positive and negative output, the wrong one can not be selected. We ask questions and provide timely advice to ensure safety


Description

LOTA Ultrasonic Cleaner
Power required: AC 110 V (-155+ 10%), 50 Hz, 100 W
Sensor: 60w Ambient Temperature: -10℃ 40℃
Humidity: 35585%
Transducer frequency: 40z
Size:9.8x9.3cm
Color: Silver
Material: Stainless Steel
Package Includes: 1 x Ultrasonic Cleaner Power Driver Board
1 x Transducer
Package contents above and other products are not included here.
Note: The color and size of the actual item may vary slightly from the color and size on the website due to lighting and display conditions. The range of allowable measurement errors is 0.4 - 1.2 inches (1 - 3 cm).