■ Automatically switches between channels even when radar waves detected; Automatically detects and avoids noise from wireless cameras; Stable communication even with multiple tablets in power saving mode.
Technical Standards Compliance Mark Certified Product
Frequency Range (Channel):
IEEE 802.11a: 5.18GHz to 5.7GHz (36 / 40 / 44 / 48 / 52 / 56 / 60 / 64 / 100 / 104 / 108 / 112 / 116 / 120 / 124 / 128 132 / 136 / 140ch)
IEEE 802.11g / IEEE802.11b: 2.4GHz (1~13ch)
Instant automatic channel switching even when radar wave detection
Equipped with a radar surveillance antenna to avoid wireless LAN outages caused by DFS (Dynamic Frequency Selection).Constantly monitor and understand non-interference channels to automatically switch channels to non-interference channels when radar waves are detected.
Automatically detects and avoids noise from wireless cameras.
Automatically detects noise from non-Wi-Fi devices, such as cordless phones, and can be changed to non-interference channels. In addition, channel changes can be performed at startup and specified time intervals, as well as dynamic channel changes that are performed by increased channel utilization and radio interference detected.It also allows you to dynamically change channels only when required according to the detection level, preventing channel changes at unnecessary times.
Stable communication even with multiple tablets in power saving mode.
When the tablet is not connected to an AC adapter, it will enter a power-saving mode that suppresses radio transmission and reception without communication. If you attempt to communicate at the same time with a multitude of tablets connected to access points like school class, it may become a power-saving mode until the communication order turns over. This product has efficient communication so that it can communicate with many tablets in power saving mode. We test video playback on 40 tablets that do not connect an AC adapter to ensure that you can play videos on all devices.
Download materials smoothly
Transfer large capacity data in a short time, and download materials via wireless LAN is smooth.It can also be connected to conventional 11 n/a/g/b devices so you can easily create a comfortable wireless LAN environment without having to replace your existing wireless devices.In addition, if you introduce a large number of smartphones and tablets in the future, replacing access points is not required, so you can use it for a long time.
Combines stability and high speed.
This product is officially compatible with 5 GHz high-speed wireless LAN standard 11ac and 2.4 GHz bands that are difficult to weaken even after distances of distance.It can be used at a maximum of 866 Mbps (theoretical value) of 5 GHz and a 2.4 GHz band of up to 400 Mbps (theoretical value) depending on the setting and application.
You can set the IP of each device without having to set up the existing router.
Equipped with a DHCP server function that automatically assigns an IP address to a computer connected to this product. It is useful when you cannot change the settings of your existing router with this product.
Even if you have multiple access points, you can be sure that you dont have to worry about it.
If multiple access points are installed, you will not know which access points are set up, but the Im Here feature lets the LED light up to notify you of the access points you are setting so you dont have to worry about the subject.
Smoothly resolves the cause of radio waves and radio wave troubles.
This product and the management software "WLS-ADT" (sold separately) is equipped with a "radio wave environment visibility" function that allows you to check the radio wave environment.
It can display the radio wave usage rate for all channels, whether there is an interference source, and the channel map, and calculate the overall evaluation of the channel and display the recommended channels.Helps you check before introduction
One access point provides a stable communication environment
Connect 256 devices simultaneously.Can be used in office with more PC or tablets.
Supports WLS-ADT wireless LAN system centralized management software
Anyone can communicate with the settings of a common SSID
This product is equipped with an emergency mode that allows you to communicate with a common SSID without having to input a password.If you install this product in a location that can be evacuated such as school gymnasiums and municipal facilities, you can turn on "Emergency Mode" to allow evacuation to communicate with your smartphone or tablet, and know your safety confirmation communication and disaster information.
Mounting hardware included
Specifications
Operating Environment: Temperature: 32 - 122°F (0 - 50°C) (when wall mounted/ceiling installation); Humidity: 10 - 90%
Compatible PoE power supply devices PoE:IEEE 802.3at compliant.
Supported Options: Network Management Software: WLS-ADT WLS-ADT/LW *WLS-ADT, WLS-ADT/LW Both Ver. 3.0.0 and later Security Case: WLE-OP-SCA AC Adapter: WLE-OP-AC12C Console Cable: BS-CON Magnet Kit: BS-MGK-A Vertical Stand: WLE-OP-STN Magnetic Hardware: LSW-KG5P Replacement Antenna: WLE-OP-ANT
Wireless LAN interface Transmission method: Direct diffusion spectrum (DS-SS system), straight wave frequency split multi-modulation (OFDM system), single transmission (half-duplex), frequency range (channel): IEEE 802.11a: 5.18 GHz - 5.7 GHz (36 /40 /44 /48 /52 /56 0/64 /100 /104 /108 /112 /116 /120 /124 /128 /132 /136 /140ch ) IEEE 802.11g /IEEE 802.11b: 2.4GHz (1~13ch)
Security: WPA3 Personality, WPA2/WPA3 Personality, WPA3 Enterprise, WPA2/WPA3 Enterprise, WPA3 Enterprise 192-bit Security, WPA2 Personalize (WPA2-PSK AES), WPA/WPA2 Personal(WPA/WPA2 mixed mode-PSK AES/TKIP), WPA2 Enterprise(WPA2 2-EAP AMP ES), WPA/WPA2 Enterprise (WPA/WPA2 mixed mode-EAP AES/TKIP), Enhanced Open, Reject AnyConnection, Privacy Separator, MAC Address Filter
Antenna: External (External), Transmitting and Receiving (Tx /Rx): 2, Radar Wave Surveillance Antenna x 1 (Built-in)
Compliance Standards: IEEE802.11ac /IEEE802.11n /IEEE802.11a /IEEE802.11g /IEEE802.11b
Data Transfer Rate (Theoretical Value): Up to 866Mbps (IEEE802.11ac), up to 400Mbps (IEEE802.11n), up to 54Mbps (IEEE802.11a, IEEE802.11g), up to 11Mbps (IEEE802.11b)
Access Method: Infrastructure Mode, WDS Mode
Interface: 2.4 GHz and 5 GHz simultaneous communication
Repeater function (WDS): support (up to 6) wired LAN interface
Access Method: CSMA/CD Terminals: 2 (AUTOMDIX compatible). *PoE power reception compatible with LAN 1 terminal. Compliant Standards: IEEE802.3ab (1000BASE-T), IEEE802.3u (100BASE-TX), IEEE802.3 (10BASE-T), IEEE802.3x Flow Control, IEEE 802.1Q VLAN tagging Switching Data Transfer Method: Store & Forward Address Table: MAC Address 4096 Address (Automatic Learning Method), Terminal Shape: RJ-45 Type 8 Pole Connector, Data Transfer Rate (Standard): 10M/100M/100M/100Mbps (Autosense) Transfer Distance: 1000BASE-T (8 m) B1Q4/4D-PAM5), 100BASE-TX(4B5B/MLT-3), 10BASE-T (Manchester Coding)
USB terminal: 1 port (USB 2.0 TypeA) *USB Flash only
Management Functions Management Protocol: SNMP (v1/v2c/v3/Trap)
Other features: Support Web (Browser IE8 and above), CLI (TELNET, SSH, Console, TFTP Client), WLS-ADT (sold separately), F/W upgrade function by HTTP, saving/restore settings (web) RSTP (IEEE802.1w), Syslog function, Syslog transfer support, MIB II, IEEE802.11MIB, BridgeMIB, Interface. MIB, IEEE 802.1, LLDP-MIB, IP Recognition Method: Manual /DHCP
Security Features: Multi-SSID: Up to 32 pieces (16 pieces of 2.4 GHz bands, 16 pieces of 5 GHz bands) Tag VLAN (802.1Q): Up to 32 pieces, VID=1-4095 Encryption method: WEP (64bit/128bit), WPA2 (AES), Privacy separators (STA/SSID), Port-based VLAN, Reject Anywhere: SID Concealing), MAC Address Filter, Management User ID/Password, Radio Output Limiting Function
Support Features: DFS fault avoidance function, automatic interference wave avoidance, radio wave environment visibility. *1, remote management function, radio output adjustment, radio interference prevention function, APSD, DTIM, Beacon Period, QoS, load balance (limit number of connections), built-in RADIUS server function, Proxy ARP (Proxy Arp) function. *1 management software "WLS-ADT" (sold separately) is required.
Power Supply Method: AC Power Supply: Yes PoE: Yes (IEEE 802.3at)
Maximum Power Consumption: 18 W
External Dimensions (W x H x D): 6.9 x 7.9 x 1.8 inches (175 x 200 x 45 mm). *Main unit only (excluding antenna, protrusions).
Weight: Approx. 28.7 oz (800 g).
Standard: VCCI Class B
Main accessories: Wall mounting hardware, wall mounting screws, antenna, anchors, instruction manual (English language not guaranteed).
■ Automatically switches between channels even when radar waves detected; Automatically detects and avoids noise from wireless cameras; Stable communication even with multiple tablets in power saving mode.
Technical Standards Compliance Mark Certified Product
Frequency Range (Channel):
IEEE 802.11a: 5.18GHz to 5.7GHz (36 / 40 / 44 / 48 / 52 / 56 / 60 / 64 / 100 / 104 / 108 / 112 / 116 / 120 / 124 / 128 132 / 136 / 140ch)
IEEE 802.11g / IEEE802.11b: 2.4GHz (1~13ch)