Features:
Can be switched between 60° and 20°. Separate type for increased work efficiency.
The measurement part is separated from the display of the main unit, so you can achieve high work efficiency and safety without choosing a location.
Calibration can be done with one touch.
·Measurement angle switching between 60°/20°.
[Use]
Paint ink quality control
Inspection and diagnosis of painted surfaces.
·Check relation to print
Appearance inspection of plastic moldings.
Inspection of finishes for building materials and stone, etc.
Inspection of floor wax application in hotels, office buildings, shops, etc.
·Quality inspection and appearance checks on film, tape, rubber, leather, etc.
Specifications:
Optical system: 60° measurement / 60° input angle: 60° light reception angle, 20° measurement / 20° shooting angle 20° light reception angle 20°
Measurement area: 60° measurements: 3×6mm ellipse, 20° measurement / 0.1 x 0.2 inch (3×4 mm) oval
Light source: LED (wavelength 890nm)
Light source life: semi-permanent
Light receiver: SPD (silicone photo diode)
Measurement range: 0 - 100
Display Range: 0 - 199 (resolution 1)
Reproductivity: Within +-5% F.S. +-1digit.
Continuous working time: 50+ hours
Usable temperature range: 20 - 104°F (10 - 40°C)
Additional Functions: Automatic calibration, auto power off, display hold, overrange display, battery level display.
Optical Dimensions (W x D x H): 3.5 x 1.8 x 1.2 inches (88 x 45 x 30 mm).
Size: 5.5 x 3.0 x 1.3 inches (140 x 75 x
Weight: Approx. 12.8 oz (350 g) (with built-in battery).
●使用用途を守って使用して下さい｡●こちら時間指定はお受けできません｡