==================================================================
Drilling holes on hard metal plates can be a lot of time and may be difficult, but you can use a puncher to make it more efficient in a short time.
The puncher is a strong construction with a drill punch, and is a tool that allows you to quickly drill holes in metal and is used for electrical equipment work, drilling into distribution boards, etc.
Metal drilling is typically used for drilling.
But with the puncher, you can work faster than a drill and dont have to worry about small debris, and the surrounding mess.
==================================================================
|
|
|
|
---|---|---|---|
Adjustable working angle.The drill head can be rotated 360°, so you can freely adjust it according to your working angle. |
Pressing and releasingTurn the pressure knob counterclockwise to release pressure.Turn the pressure knob clockwise to release the pressure. |
Standard set of 6 diceStandard set of 6 dice in diameters 22.5mm, 23.8mm, 34.6mm, 43.2mm, 49.6mm, and 61.5mm for metal plates up to 3.5mm thick. |
Comes with a convenient storage case.Comes with a plastic storage case, making it easy to clean up and carry after use. |
Pump breakaway puncher | Pump breakaway puncher | Electric Integrated Puncher | Battery Operated Puncher | Electric integrated puncher, cable cutter, crimping pliers | Manual Hydraulic Puncher | |
---|---|---|---|---|---|---|
Compatible Metal | Iron plate / aluminum plate 0.06 - 0.24 inch (1.5 - 6 mm), stainless steel 0.06 - 0.08 inch (1. | Large, H Flat Copper, Copper, Aluminum Bath Bar | Copper with thickness of 0.3 inch (8 mm) or less, aluminum plate, iron and steel plate with thickness of 0.2 inch (6 mm) or less. | Iron plate up to 0.1 inch (3.5 mm), stainless steel up to 0.08 | Cuttable Cable Diameter: ~ 1.6 inches (40 mm), Crimping Range: 0.6 - 11.8 inches (16 - 300 mm²), Drilling Range: Outer Diameter: 0.9 - 2.4 inches (22.5 - 61.5 mm) | Copper plate, iron plate, aluminum plate |
Output | 12t | 30t | 60KN | 60KN | 6t | |
Deep Throat | 90mm | 80mm | ||||
Drive Type: | Electric and Manual Pump | Electric and Manual Pump | AC100~120V/60Hz | 18V DC/3.0Ah, Lithium Battery | 18V DC/3.0Ah, Lithium Battery | Manual |
dice | 1.0 inches (26 mm), 1.4 inches (35 mm) | φ0.4 inches (10.5 mm), φ0.5 inches (13.5 mm), φ0.7 inches (17 mm), φ0.8 inches (20.5 mm). | 6.5mm, 9mm, 13mm, 17mm, 20.5mm | φ22.5mm, φ28.3mm, φ34.6mm, φ43.2mm, φ49.6mm, φ61.5mm, | 22.5mm, 28.3mm, 34.6mm, 43.2mm, 49.6mm, 61.5mm | 22mm, 27.5mm, 34mm, 43mm, 49mm, 60.8mm |