Feature

●Made in Japan
●Accessories: Water saving core included


Description

One-touch lever
View larger Spaces
View larger Features of Single Mixing Faucet
View larger One-touch lever

One-touch lever handle allows you to control the temperature of hot or cold from the stopping of water to the one-touch operation.
Also great for frequent kitchens and more. The most basic type.
Replacement from the two-valve combination faucet for improved usability and water-saving effect.

Spacious

The pipe is upward, so the sink can be used widely.
For example, when you pour water into a kettle or water bottle, filling water into a large pot, it is inconvenient when the sink is close to the pipe.
It also eliminates the inconvenience of this product.

About Flow Regulator Valve

The flow control valve located on the bottom of the eccentric pipe can be opened and closed with a flathead screwdriver, making it easy to fine-tune the amount of water and hot water.
When performing maintenance and inspection of cartridges, etc., this part can stop the water from this area, so there is no need to close the shut-off faucet throughout the house.

How does a single mixing faucet ?

The cartridge connected with the lever handle allows the water to be opened and closed to reduce the amount of water flow and temperature of the hot water.
Please note that the cartridges used for single lever mixing faucets are genuine parts different from each manufacturer to
When replacing the cartridge, you will need to check the manufacturer name and model number of the mixing faucet.

How to replace the mixing faucet?

• The basic way to replace the wall mount type is
  Both two valve mixing faucets, single lever mixing faucets, and thermoshower mixing faucets.
  How to replace it as below.
• Removal:
  1. Close the shut-off faucet.
  2. Loosen the nut of the old mixing faucet,
  3. Remove the old body.
  4. Remove old eccentric pipes (2 pieces) counterclockwise to clean pipes
• [Installation]
  1. Wrap the seal tape on the new eccentric tube (2 pieces)
  Lightly pull 6 to 7 times clockwise toward the screw.
  2. Screw the new eccentric pipe (2 pieces) into the pipe.
  3. Attach the body to the eccentric tube,
  4.Tighten the nut and done.
  5. After installation, open the shut-off faucet and there is no water leakage.