Feature
●"Preparation is for life when making things. Everything is determined by the precision of cutting. The concept of ironcraft DIY is now available in the SUZUKID lineup with a desire to complete all types of materials cutting to welding
●Can be cut from 0 to 60 degrees
●Equipped with self-cutting function for improved work efficiency
●Input Power: AC 100 V
●Bandsaw Blade Size: Length 57.2 inches (1435 mm) x Blade Width 5.1 inches (13 mm) x Blade Thickness 0.2 inches (0.65 cm)
●Optional sold separately (P-805 Contour Table, P-806 Long Scale Guide)
[Edge Hopper + Semi-Automatic Welding Machine]
[Single Item]
[Edge Hopper + Sputter Preventive]
Description
Cutting angle: 0° - 60° (head rotation)
Speed Adjustment Dial: Stepless
Cutting capacity
Cutting board thickness: 0.8 inches (20 mm)
Round Pipe 0°/Φ125mm 45°/Φ76mm
Square Pipe 0°/125mm x 125mm 45°/76mm x 125mm
From the Manufacturer
Various adjustment functions
|
|
|
|
|---|---|---|
Cutting angle adjustmentThe angle adjustment lever can be adjusted from 0° to 60°. Supports fine angle cutting as well as right angle and 45°. |
Bandsaw blade guide adjustmentAdjust the position of the guide roller according to the length of the cut. By adjusting the position of the guide roller, the effect of reducing blade shaking. |
Bandsaw blade tension adjustmentThe bandsaw blade can be easily removed if the tension is weak. With your finger the center of the bandsaw near the cutting area, it is suitable for tightening about 0.04 - 0.08 inch (1 - 2 mm) to sag. |
|
|
|
|
|---|---|---|
Dial adjustmentSpeed adjustment dial Adjust the speed according to the material and thickness of the cutting material.The 11P instruction manual is listed with a cutting guide chart. User manual is also available from SUZUKIDs HP to DL. Circuit Breaker Use this unit when overload and stops. Turn off button → unlock trigger → operate circuit breaker. |
About TriggerPress the trigger switch to rotate the bandsaw blade. Press the trigger lock while holding the trigger switch to maintain its rotation and allow for self-cutting When the trigger lock or trigger switch is pressed on, the blade of the bandsaw will rotate, so please handle with care. |
About Lock PinsYou can change the position of the main unit opens. When not in use, please push the lock pin to secure the closure when moving or using the contour table. During normal cutting work, the lock pin will be pulled forward and unlocked to use. |
