Feature

●Thickness = 0.5 inches (12 mm) x Pipe Diameter = 65 A (2" 1/2)
●Thread part = Coarse [Pitch: Approx. 0.07 inch (1.75 mm)]
●Note on product images) This is a representative size image. Length of each part such as engraving, thread portion, pitch, etc. varies by size
●Note: Please be sure to check the drawing for the size and other items

[M4×15A (1  & 2)]

Description

■ Shape: U-bolt

U-shaped bolts used to install pipes and pipes. The threads are cut on both ends, so when installing the pipe, use nuts, washers, and special plates.
U-bolt size may vary depending on the outer diameter of the pipe being installed.
■ Thread Shape: Coarse

It is the most standard pitch in Japan as prescribed by ISO (International Organization for Standardization) standard. The most frequent distribution in Japan.
■Material: Stainless steel

Most representative stainless steel (equivalent to SUS304)
The strength is almost equal to "iron".
Excellent corrosion resistance and good mechanical properties.
Although it is normally not magnetic, it can harden due to cold processing, and it may cause magnetism.
■Surface treatment: fabric

Surface treatment/plating is untreated.
Therefore, corrosion resistance and appearance are the characteristics and color of the material itself.