Designed specifically for R/C cars and robots. It can be moved up and down smaller than 180 degrees. The ov7670 camera can be used for Arduinos robot or R/C car scene shooting. Arduinos products that work with official Arduinos boards.
Camera:
- 3V3: Input power supply voltage
- GDN: Earth
- SIO_C: SCCB port control clock (some low MCU require up control as I2C)
- SIO_D: Serial data input and output port of SCCB port (some low MCU need up-control as the I2C)
- VSYNC: Frame synchronous signal (output signal)
- HREF: Horizontal sync signal (output signal)
- PCLK: Pixel Clock (Output Signal)
- D0~D7: Data Port (Output Signal)
- RESTE: Reset port (pull up for normal use)
- PWDN: Power consumption selection mode (pull down under normal use)
- OV7670 image sensor is small, working voltage is low. It provides MCU VGA shooting and image processing function. It can output all frames, subsampling and other 8-bit data via SCCB bus control. VGA images up to 30 fps The user has full control of image quality, data format, and how it is transmitted. All image processors such as gamma curve, white balance, saturation, and color can be programmed via SCCB port.
- Standard SCCB ports, compatible w/I2C ports Output Format: RawRGB, RGB(GRB4:2:2, RGB565/55/444), YUV(4:2:2), YCbCr(4:2:2) Supports all sizes from VGA, CIF, and CIF to 40 x 30. Variopixel subsampling method Auto Control Function: Auto Exposure Control, Auto Gain Control, Auto White Balance, Auto Light Strip Removal, Auto Black Level Calibration Image controls include saturation, primary color, gamma, sharpness and anti-brom. ISP features noise cancelling and dead pixel compensation. Support image zoom and lens light correction 50/60Hz auto-check; Saturation automatically adjusts (UV) Automatically adjust the edge and automatically adjust noise reduction.
- Photo Layout: 640 x 480
- IO Voltage: 2.5-3V
- Power consumption: 60mW / 15fps
- Sleep:<;20uA
- Temperature: -30~70℃
- Working temperature: 0~50℃
- Output Format (8bit): YUV/YCbCr4:2:2, RGB565/55/44, GRB4:2:2, Raw RGB Data
- Optical Size: 1/6"
- Viewing angle: 25 degree
- Max Frame Rate: 30 fps
- VGA Sensitivity: 1.3V (Lux-sec)
- NSR:46dB
- Dynamic: 52dB
- Browsing Method: Line Unit
- Electronic exposure: 1 - 510 lines
- Pixel area: 3.6 x 3.6um
- Dark Current: 12mV / s T 60C
Cradle Head:
- Suitable for regular 9g servos
Weight: 0.5 oz (15 g).
- Operating Torque: 1.6kg / cm
- Response rotation speed: 0.10s / 60 degree
- Working temperature: -30~60℃
- Dead Zone: 2ms
- Plug: JR, Futaba
- Rotation Angle: Max. 180 degrees
- Servo: Digital Servo
- Working current: 0.02A
- Working Voltage: 3.5-6V
- Construction: Nylon + Plastic Gear