Feature

●Thickness = 1.2 inches (30 mm)
●Thread part = Coarse [Pitch: Approx. 0.1 inch (3.5 mm)]
●Note on product images) This is a representative size image. Length of each part such as engraving, thread portion, pitch, etc. varies by size
●Note: Please be sure to check the drawing for the size and other items

[M14]



[M16]



[M6]



[M20]



[M30]



[M8]



[M22]



[M10]



[M24]



[M12]




Description

■Shape: Bag nut

Hex nut on one side with domed metal overlay
Screws such as bolts are not exposed than threaded holes, so they look good and improve safety.
Use a tool such as a spanner or wrench to tighten it.
■ Thread Shape: Coarse

It is the most standard pitch in Japan as prescribed by ISO (International Organization for Standardization) standard. The most frequent distribution in Japan.
■Material: Iron

Iron is steel. Steel is an alloy of iron containing less than 2% carbon.
Although it is commonly used in many circulations, it is cheap materials, but due to the downside of it is easy to rust, many surface treatments will reduce corrosion.
■Surface treatment: Dove

Hot dipped galvanized and plated with "dob" dipped into zinc dissolved It has excellent corrosion resistance at a fraction of the cost, but the thickness of the plating is quite thick and uneven and the surface is uneven, so the gauge of the thread cannot be managed. Therefore, female threads need to be overtapped. They may stick together.
Color is "Gray".