■Leqtique - "ProVoost"
Leqtiques first 1+ (1) Knob layout effectors are based on the architecture of HiFi Sounding due to the diversity of the special components youve ever developed, and the original design of the simple circuits that lying in the Super HiFi Opamp LT1122 and Moscow electronics warehouse with quality vintage Russian MIL-spec condensers that were already built sound and guitars. Boost up as it is. Completed as "ProVoost".
The "Boost" given to the large chicken knob is designed to be a hearing unity gain, so it is suitable for use as a pure buffer instead of a booster. When that happens, the "Soft" mini-control is the activity. This control can vary electronic circuitry input impedance from approximately 16kΩ to 1.2MΩ. Basically, a full left Soft=0% will result in a revered sound of impedance integrity and lost high-range brilliance, but if you feel it is not natural, turn the Soft Control right around to avoid excessive on/off sound difference. The input impedance is very low when turned right, so the volume will be slightly reduced (if you have adjusted the volume with Boost and it will not affect the impedance. It can be used as an aggressive tone shaper, as it can be used as a soft high range. On the other hand, the Boost control has a boost of apprpx 20dB to make each band as flat as possible and does not snag at all. Personal recommendation is to use as volume or gain booster first, adjust the boost volume as Soft=0%, and turn the Soft right to the right and make the final sound build.
From 2010, a small handmade workshop Leqtique Effector has used a substrate with 1 Oz. (0.035mm) copper foil on all models, but it was successfully using a special 3 Oz substrate for the sister brand "L" and using this idea as Leqtique on a double sided substrate. Used for Null Line and success. This is actually a thicker gauge than the typical wire used inside the 21AWG wire (Effector). It is named Virutual Point to Point Board (VPtP Board) instead of being virtually the same as Point to Point wiring that should be the best for sound.
Control : (Left to Right) Soft(Mini Control), Boost
After the extremely small output impedance effector or when an active pickup guitar is connected to the ProVoost, the "Soft" control will weaken, but it is designed specifications.
Operation Voltage: 6 - 18V, Current Consumption: Approximately 8.3mA
Reference price is the manufacturers estimated price at the time of the product release