Feature

●Size - Model: 1205 (Inner diameter=25 mm, outer diameter=52 mm, thickness=15 mm)
●MATERIAL - Rolling ball is made of chrome steel with excellent surface quality, hardness, load bearing and abrasion resistance. The cage is made of stamped steel
●FEATURES - Double row, open AB EC1 accuracy, normal clearance
●Capacity - Dynamic Rated Load (Cr): 12kN; Static Rated Load (Cor): 3.3kN; Suitable for medium radial and low thrust loads
●Applications - Includes office automation, film processing equipment, vertical spinning equipment, industrial intermediate shafts, etc


Description

Description:


2 rows, pre-lubricated, normal accuracy

These self-aligning ball bearings are non-separable open bearings. It has two rows of steel balls, two inner wheels, and the outer ring is an inner sphere, and self-aligning performance that automatically corrects coaxial errors due to deformation of shaft deflection.

It is primarily capable of withstanding radial loads but can withstand small axial loads and is usually unable to withstand pure axial loads. When applied to a support sheet hole, the component cannot maintain coax but the relative tilt of the self-aligning ball bearings cannot exceed 3 degrees.

Rolling bearings are used in a wide range of applications, from agricultural machinery to conveyors, robots, elevators, rolling machines, and boat rudder shafts.


Specifications:



Model: 1205

Seal Type: Open type

Inner wheel/outer wheel material: chrome steel

Cage Material: Stamping Steel

Inner Diameter: 25mm