[a]
1 x Seamless Stone Jointer Manual Rubber Vacuum Leveler for 6" Suction Cup Joint How to Use 6" Jointer 1: Fixed (left) Suction Cup on the left board. Movable (Right) Place the suction cup on the right side
2: Pump the plunger until the suction cup is fully absorbed.
3: To join the seams, turn the side knob counterclockwise until you are satisfied with the seamless look.
4: To level the slab, make sure one of the lower side of the blue head top knob is on the high side of the seam, then turn the top knob clockwise until the slab is level. The level adjustment is typically done using only one of the top knobs. Please use 2 if you need additional installation.
5: When the seams are finished, lift the tab at the end of the rubber suction cup to release the suction cup.
Specifications:
Size: 450*155*120mm
Total length: 17.7 inches (45
Suction cup diameter: 15cm
Packing list: 2 x sewing machines (except other decorations)
PREVENTION:
1. There might be a little color difference due to different display and reflecting light. Please refer to the actual item.
2. This product is measured by hand, there may be a certain degree of error.