Feature(may vary by option.)

●Sheet Size (H x W): 4.3 x 7.5 inches (110 x 190 mm), Single Size (W x D x H): 1.8 x 1.5 inches (45 x 38.8
●Enjoy putting it on stationery, accessories, mobile phones, smartphones, etc. Can be applied to cars, motorcycles, mirrors, windows, bathrooms, kitchens, and more
●Once applied, only the design part will remain on this cutting sticker
●Clear application film applied Slowly peel off the release paper and apply
●Material: Outdoor marking sheet, PVC

[white]




[Black]





Description

stickers, cutting stickers, nc-smile, nc smile, nc smile, made in Japan stickers, cutting stickers, nc-smile, nc smile, nc smile, made in Japan

Made with domestic marking film, it is durable, weather resistant, and water resistant, and can be used outdoors.

Automobiles, motorcycles, bicycles, boats, outdoor advertising signs, shops showcases entrance doors, windows, mirror suitcases, storage boxes, laptops, furniture, household goods, etc.

Unlike stickers and printed stickers, only letters and illustrations are left behind, making use of the material on the surface you are applying to.

stickers, cutting stickers, ncsmile nc-smile stickers, cutting stickers, ncsmile nc-smile

Notes on applying the product

Please clean the surface of the product before applying it to remove oil and dust.If the outside temperature is low, please heat it with a hair dryer or apply it tightly.Instead of sticking squeegee, you can replace unnecessary plastic cards.It is easy to work by wrapping a felt or mini towel.Peel off the release paper (white paper) or application sheet (transparent film) slowly and carefully.Although it is highly durable for outdoor use, please clean or wipe dry immediately after application and use it after a few days.Concrete and wood cannot be applied to.Apply to any smooth surface.Please refrain from cleaning organic solvents such as thinners.

How to apply the product

stickers, cutting stickers, ncsmile nc-smile stickers, cutting stickers, ncsmile nc-smile

stickers, cutting stickers, ncsmile nc-smile stickers, cutting stickers, ncsmile nc-smile

stickers, cutting stickers, ncsmile nc-smile stickers, cutting stickers, ncsmile nc-smile

stickers, cutting stickers, ncsmile nc-smile stickers, cutting stickers, ncsmile nc-smile

(1) Determine the position of the sticker and pause it.

Find the position where the sticker will be installed, apply the guides tape with the masking tape, and determine the position guide for your application. Position the sticker along with the guide tape. Secondly, only one side masking tape to secure the sticker (temporary)

(2) Take off the release paper (backing paper)

After fixing the tape (temporary), flip the fixed part over the shaft and peel the white release paper "slowly". Static electricity is applied.Please be careful of dust and other adherence.

(3) Press the sticker with a squeegee.

Use a squeegee and slowly crimp the sheet down to proceed with the application surface. Please note that the position cannot be corrected if used on dry surfaces.

(4) Remove the clear application sheet

When fully applied, use a squeegee to scrape hard over the clear film to make sure it is firmly crimped. Finally, peel off the transparent application sheet slowly and carefully.Small bubbles will naturally fall out in a few days.Visible If there is no trapped air bubbles, use a cutter to drill a small hole and push out with your finger.

Since this is the basic method of installation, please change the presence or position of the guide or tape for temporary temporarily depending on the size and design.

Product information