Specifications
Material: ABS + acrylic.
Optional Color: Black, Brown, White
Size: Approx. 16.9 x 14.2 x 2 inches (43 x 36 x 5 cm).
Installation Instruction
1. Use Tool Pencil Ruler Pliers Chain Saw Drill Driver Tape Measure
2. To facilitate the installation of the dog door, you can remove the door and install the pet door.
3. Trim out the paper template along the dotted lines to install the paper template on the door
4. Then use the pencil to draw a square line
5. Use the drill bit to drill 4 square holes and 4 holes
6. Use a serrated wire saw machine to insert holes into square lines and cut to remove door plate
7. Insert the door frame inside the pet door into the open door hole
8. Mark the 4 holes on the door with a pencil
9. Use the drill bit to drill a hole around the marked position and then penetrate the door
Insert the door frame inside the pet door from the bottom to the door hole and install the screws.
11. Install the dog door before installing the door
12. Installation is complete
Packing List:
1 x Pet inner door
1 x Pet exterior door.
4 x Screw Nuts
4 x Screws
1 x Gasket
1 x Instruction