Feature

●You can chuck the air pressure and temperature of the tire using the smartphone app
●IP67 waterproof level, dust and water are not easy to enter, so it can be easily used in bad environments
●Common use on cars, commercial vehicles, off-road vehicles, MPV, SUVs, spacier vehicles, etc
●Wireless sensor just replace the air valve cap. No wiring is required, so you can tell the tire pressure and temperature inside the tire
●In order to protect the safety of the driver and passengers, the tire pressure monitor instantly monitors the condition of the tire pressure and temperature, avoiding tire leakage, and excess air pressure and temperature


Description

Product Description

Smart 4.0 Car TPMS Bluetooth Tire Pressure Monitoring System 4 External Sensor

Item Description:

Kernel: ARM M0.

Operating Voltage: 3V

Working current: 100 A

Sleep Current: less than 2.2 A

Bluetooth operating frequency: 2.4 GHz

Bluetooth transmitting power: 0dBm MAX

Response time: less than 5 seconds

Display mode: APP mode

Waterproof Grade: IP67

Material Type: ABS + Metal

Connection method: Bluetooth 4.0 for cell phone

Operating Humidity: 95% max.

Tire pressure detection range: 100-1300 kPa

Tire pressure detection accuracy: + 10 kPa

Fetal Temperature Detection Accuracy: + 3 C

Operating Temperature: -30 C to +80 C (External)

Storage Temperature: -30 C to +85 C (External)

Battery Capacity: 140mAh (External)

Features:

- Real-time monitoring tire pressure and temperature data in all directions

- Tire leakage alarm, low pressure alarm, high pressure alarm, high temperature alarm

-TPMS sensor supports Bluetooth 4.0 to cell phones. Fast and accurate

- Four internal sensors are installed to prevent theft and waterproof (IP67).

-KPA, BAR, and PSI switch function.

-C and F temperature switch function.

- Real-time tire detection ensures traffic safety.

- Fuel economy, less wear, tire burst, APP display

- Tire pressure and temperature

- Simultaneous Monitoring

- Displays four wheels simultaneously

-Accurate and safe..

-Applicable to all models.

Installation Steps:

1. Remove the original tire nozzle.

2. Install the tire pressure sensor.

3. Tire inflation

4. Cover your mouth.

5. Dynamic Balancing Machine Test

6. Adjustment and counterweight

External Sensor Installation Instructions:

1. Unscrew the tire nozzle cap and install the tire pressure release ring.

2. Attach the external tire pressure sensor in order to the tire nozzle.

3. Screw the sensor and use the wrench to tighten the guard ring counterclockwise.

Note:

- The above procedures require a professional installer to install. After installing the sensor, please check if there is no air leakage.

- Follow the markings to install the sensor on the corresponding tires.

- Store the special installation tools of the sensor in your car for disassembly and installation

Package included:

4 x Sensors

1 x Card with App QR code

1 x Wrench

1 x English User Manual