Digital Vernet, 5.9 inches (150 mm), Applications and Specifications

For measuring outside diameter, inner diameter, depth, and step.

Measurement Range: 0-150 mm

Digital Verdigis 5.9 inches (150 mm) Visibility and Function

Large digital display (letter height: 0.5 inches (12 mm)

Prevents mistakes compared to dial types.

Comes with a HOLD switch that can fix the measurements and a ZERO switch that is convenient for comparison measurements.

Silver Scale, 5.9 inches (150 mm), Applications and Specifications

Measure the length with the scale on the surface, and measure the depth with the scale on the back.

Measurement Range: 0-5.9 inches (0-150 mm) Length tolerance: ± 0.15 mm (0.15 mm) Pitch: Upper level 1, Lower level 0.02 inches (0.5 mm)

Silver Scale 5.9 inches (150 mm) Stair Scale Function

Designed to hang the graduations on a stairway for easy identification of 1mm increments.

0.02 inch (0.5 mm) pitch scale.Suitable for more detailed work.

Silver Curve Scale, Thick Wide, 5.9 inches (15 cm), Applications and Specifications

For measurement measurements, right angle measurement and injury work.

Length Tolerance: ±0.2 at 5.9 in (150 mm) Straight Angle: Less than 0.1 per 100 (scale side)

Silver Curved Scale, Thick Wide, 5.9 inches (15 cm), Stair Scale Functions

Designed to hang the graduations on a stairway for easy identification of 1mm increments.

Safety rope mounting holes help work in high altitudes

Sixness Gauge 65M Application/Specifications

For gap measurement

Thickness Tolerance: 0.01-0.06 mm (±0.005 mm) Thickness Tolerance: 0.07-0.10 mm (±0.01 - 0.35 mm (±0.015 mm) Thickness Tolerance: 0.40-0.60 mm (±0.02 Pairs): 25

Sixness Gauge 65M Size Identification Function

Each leaf is printed in size for easy identification.

Multiple leaves can be combined for precise gap measurement

It can also be inserted into the minute gap between two flat surfaces that are difficult to measure with measuring instruments.

Taper Gauge #700 1-15mm Application/Specifications

For measuring the hole diameter by measuring the width reference scale on the surface.

Length scale on the back side for measuring length.

Net Weight: 0.004 in (0.1 mm) (0.05 mm) (tapered angle): 7, 9, 10.

Taper Gauge #700 1-15mm Conversion Table with Clip

The reverse side includes a conversion table for use with round holes.

Comes with a clip for easy portability.

Protractor No. 19 Applications and Specifications

Combining a semicircular protractor and rod (blade) for angle measurement

Eye volume (°): 1 measuring angle (°): 0 - 180 accuracy: ±20

Protractor No.19 Scale Function

The rod has a scale on the end for measuring dimensions and depth measurements.

Adjust the rod to any angle and tighten the set screw to secure it for injury work.