Product Features
1. One-piece waterproof design.
2. With lock flip lid.
3. Hidden touch panel.
4. Intelligent defrost function, can be used when freezing.
5. Choose from 4 functions for boiling, insulating, tea making, and brew milk.
6. Multiple protection mechanisms, anti-damping protection.
7. Stainless steel inner for environmental and health.
8. Select high and low power mode with voltage range of 12-24V and suitable for many cars on the market.
Operation Instruction
1. Boiling.
If you select the "Boiling" function, the text will be bright on the screen and show the actual water temperature. When the water is boiling, it will automatically stop heating and the buzzer will ring twice.
2. Heat retention.
Select the "heat insulation" function, the text will be brightly displayed on the screen, and press "Ý" to adjust the desired temperature (set temperature will be stored for the next use), the actual temperature and set temperature will alternate when heating. When the water temperature reaches the set temperature, it will automatically hold the temperature. Buzzer sounds twice.
3. Tea
When you choose the "tea" function, the letters will be bright on the screen and show the actual water temperature. When the water is boiling, it will automatically stop heating. Buzzer sounds twice. When the water temperature drops to 90°C, it will automatically heat and maintain to 90℃.
4. Brewmilk
If you choose the "Milk" function, the text will be bright on the screen and show the actual water temperature. When the water reaches 45 degrees Celsius, the heating will automatically stop and maintain 45 degrees Celsius and the buzzer will sound twice
5. Opening and closing the cover.
A,Open the Cover: Press the button up to unlock and press the button to open the cover. B,Close the cover: press down to secure the cover and press down to lock the button to prevent accidental pushing.
It may take about 25 to 60 minutes depending on the output current of the cigarette lighter socket and the initial water temperature.
Depending on the car model, the export current limit of the cigarette lighter socket may vary.
25 minutes is the time measured at 8A current of 25 degrees at room temperature.
When the output is 4A, the time will be twice as long.
In the winter, the first water temperature is low, so the time to boil is longer.
Fault Code Description
"E1" indicates the power supply voltage is too low.
"E2" indicates that the power voltage is too high.
"E3" enters an empty fired protective state, indicating that the heating piece temperature is too high or there is a short circuit in the temperature control probe.
"E4" indicates that the water temperature probe has faulty such as openings.
The "E5" indicates that the water temperature probe is too high or there are short circuits and other defects.
The "E6" indicates that the probe protected by the heater plate has open circuits and other faulty failures.
"E7" indicates that the control circuit is abnormal, the emergency alarm is continuous, please unplug the power immediately.
Note: If the electric heating kettle stops working, please follow the instructions on the fault code to eliminate the failure. Then press the power switch again and set the temperature to use.
In order to prevent bad contact caused by improper use, it must be inserted into the cup plug and car cigarette lighter socket.