Feature

●Product Name: Brass Pendulum wheel knuckle axle weight with alloy lid + 23 mm Hex Adapter – 1Pr Set
●Stainless Steel Rolling Beads are designed to carry additional weight of 86 grams for each wheel keeping the weight downward towards the ground for better grabby performance. The increased weight can stabilize the wheel and enlarge crawling angle especially when the car is digging into some low lying area landspaces, grab the ground firmly and smoothly drive back to level. The high quality stainless steel is very suitable for muddy watery track with no fears of getting rusty.
●Install onto the front & rear of the knuckles. Outer case To adjust the weight of the pendulum wheel, there are 8 removable stainless steel beads weighing G each. Weight per piece: 66-86 grams (with 8 rolling beads, we recommend keeping at least 3 beads for better performance). 21 mm widen Hex adpater is included (16 mm wider than original). This product is only suitable for wheels with 5 mm thread hole and minimum 45 mm inner diameter.
●Accessories Included: 21 mm Hex Adapter – 2Pcs; Stainless steel pin x – 2pcs; Metal washer – 5 mm Stainless Steel Shims – 2pcs; 5 mm 2pcs; 20 mm Stainless Steel Hex Socket Screws – 2Pcs; Steel Washer – 2pcs.
●For the Traxxas 1/10 TRX – 4 defender trail Crawler (82056 – 4)


Description

Spare Part RC Traxxas TRX – 4 trail defender Crawler Upgrade Parts Brass Pendulum wheel knuckle axle weight with alloy lid + 23 mm Hex Adapter – 1Pr Set Blue