[Switching Hub]
[LAN Cable 5m Set]
Specifications:
■Connection method: 1000BASE-T/100BASE-TX/10BASE-T
■Network type: IEEE802.3ab/IEEE802.3u/IEEE802.3
■Switching method: Store & forward
■ Buffer Memory: 192 Kbytes (each port is dynamically assigned)
■Flow control control: IEEE 802.3x (with full duplex), back pressure (with half duplex)
■Switch fabric: 16.0Gbps
■ Packet transfer capacity: 12.0 Mpps
■ Filtering Speed: 1,488,000 packets/s (1000Mbps), 148,800 packets/s (100Mbps), 14,880 packets/s (10Mbps)
■ MAC address registration number:4,096 (all ports total)
■ Number of ports: 8 ports
■AutoMDI/MDI-X: Yes
■Auto Negotiation: Support (1000/100/10Mbps)
■ Connector Shape: RJ-45 x 8
■ Compatible Cable: 10BASE-T: UTP Category 3 or above, 100BASE-TX: UTP Category 5 or above, 1000BASE-T: UTP Category 5e or above.
■Non-blocking: Yes
■ Jumbo frame: Yes (9Kbytes)
- Loop detection function: Loop detection
■MTBF: 684,000 hours
■EAP Transparency: Yes
■BPDU Transparency: Yes
■ Input Voltage: AC100-240V±10% 50/60Hz
- Power consumption (rated): 4.0W
■ Heating Volume: Approx. 14.4 kJ/h
- Power saving function: Easy power saving E (IEEE 802.3az) compatible
■Energy Consumption Efficiency: 0.5W/Gbps
■Effective transmission speed: 8.0Gbps
■External Dimensions (W x D x H): Approx. 6.7 x 3.3 x 1.2 inches (171.5 x 83.6 x 30.0 mm) (main unit only)
■Weight: Approx. 14.2 oz (425 g).
■ Housing Material (Color): Metal (Black)
■Operating environmental conditions: Temperature: 32°F - 122°F (0°C - 50°C), Humidity: 10% - 90% (but without condensation)
■ Storage environment conditions: Temperature: -40°C - 70°C; Humidity: 5% - 90% (without condensation).
■Installation direction: Horizontal installation, wall mounted, magnet
■Hanging Holes: Yes
■Warranty period: 1 year
■ Compliant with the EU RoHS Directive (10 substances)
■ Compliance Standard: VCCI ClassB
■ Accessories: Dedicated AC power cable (2 pins, about 5.9 ft (1.8 m)): 1, Product information: 1 piece *Rubber feet and magnets are attached to the product body at the time of shipment. *Please use with the magnet attached to the product when installing horizontally.
【Description】
■ Power saving function that cuts power supply to ports during non-communication, saves approximately 76% of energy. *This is an 8-port hub with built-in power supply for 1000 BASE-T. The measurements were taken by transferring data from the load unit to the hub, and comparing power 1 minute after all ports and non-communications.
- In addition to a metal case with excellent heat dissipation, it also provides an "operating environment temperature of 12°F (50°C)" so you can operate it in environments where it is prone to high temperatures.
■ Equipped with loop detection function to notify network loops that may affect network operations. LED lamp flashes to alert you to eliminate blinking network failure.
■The fanless design is also suitable for use in bedrooms and offices, where silence is desired. In addition, it has reduced mobility to ensure reliability and durability.
■ We do not use electrolytic capacitors on the main board, so it has a long life design.
■ The AC power cable has been given tracking protection to prevent tracking phenomenon, even if installed for a long time.
■ Small design allows for horizontal installation and can be easily attached to a magnetic steel desk or wall, and can be hung on a wall using a wall hole on the back of the main unit.
■ This product meets more than one of our own environmental certification standards and displays the "THINK ECOLOGY" mark.
■ We are committed to environmental protection, and the packaging container of the product is made up of only paper, cardboard and polybag.
Product inquiries
Elecom General Information Center
TEL. 0570-084-465
FAX. 0570-050-012
Reception Time / 10:00 - 19:00 24/7