Description:
- It converts frequency pulse signal to analog voltage signal, can convert 0-1KHz frequency signal to 0-10V voltage output
- Adjustment frequency can change the output voltage and interconvert between frequency converters, or interface control opportunities such as control cards and frequency converters.
- Adjust the potentiometer to calibrate the relationship between frequency and voltage
- The signal input port is opisolated to ensure excellent interference.
- For F/V converter modules, the response time is about 0.3-0.5 seconds. If you adjust the frequency with a large marker at one time, you need a certain response time.
Specifications:
- Operating Voltage: 13.5V-30V
- Input Frequency Range: 0-1KHZ
- Output Voltage Range: 0-10V
- Size: about 35mm x 33mm x 14mm
How to use
- VCC: Operating power supply
- F: Input frequency pulse signal
- : Output Supported Voltage
- Connect the operating voltage to VCC and D And please do not upside down to avoid damage to it.
- When the frequency pulse signal is connected to F, there is a corresponding voltage output.
- Input and Output Response: 100HZ = 1V, 1KHZ = 10V
- If there is any deviation between usage, please adjust the potentiometer above to calibrate.
- Module accuracy is 1% and cannot be applied in areas where high precision is required.
- When input different frequencies, the output will correspond to the specific voltage.
- Input pulse level is 5V, 12V, 24V, no serial needed. But if you input the signal frequency, the time should be more than 0.5 seconds.
- If you want to use it, we have NPN. Make sure there is D line
- If you want to use it with encoder, you need to turn the encoder in 0.5 seconds.
Package Includes:
5 frequency voltage conversion module