Description:
- Constant Current/Buck Module with 5A MPPT Control
- Effectively reduces the charging time of the solar battery.
- Improve conversion efficiency of up to 95%, charging efficiency
- Can charge batteries, lithium batteries, etc.
- Various digital products that drive high power LED as a power supply for cell phone or car power supply.
Specifications:
- Properties: Non-insulated back module
- Input Voltage: 6-36V
- Output Voltage: 1.25 - 32 V continuous variable (default output 5 V)
- MPPT Voltage Setting Range: 6 - 36 V
- Output Current Range: 0.05 - 5 A (default output current is 3A, long time within 3A)
- Turn light output range:0.01~5A (default is 0.3A)Current range may be slightly different due to slight differences in the parameters of the part.
- Multi-functional double display: input voltage, output voltage, output current, output power
- Operating Temperature: -40 to +85 degrees
- Operating frequency: 180KHz
- Conversion Efficiency: Up to 95% (efficiency depends on input voltage, output voltage, current and voltage difference)
- Short circuit protection:Yes
- Overheating Protection: Yes (automatically shut off after overheating)
- Input reverse polarity protection:No (if necessary, add string to diode)
- Output suppression irrigation protection: No, output must be connected to battery plus blocking diodes. Otherwise, the module will burn out.
- Charging Indicator: red when charging, green when fully charged. When you use the solar panel to supply power, the small solar charging current is very small, smaller than turning the light current, green light, but not full. Please pay attention to that distinction.
- Installation: 3mm screws (4)
- Connection: Terminal, IN is input, OUT: output
- Size: 2.4 x 1.2 x 0.9 inches (60 x 31 x 22 mm).
Package Includes:
1PC MPPT DC-DC Back Converter
Note:
Current detection modules are low-end tests, so do not directly connect input negative output directly!