【Important Note】
Adding spacers to the vehicles hubs and wheels is an important part of the vehicle foot area by easily accessing the center of the wheel and reducing the load on the bolt.
[Precautions]
Actual hub height of the vehicle is up to 24mm. (Please note that some vehicles have a front of 1.6 - 2.0 inches (40 - 50 mm), but they cannot be attached. )
Vehicle stud bolt length must be at least 24mm
The spacers of the 1.2 inches (30 mm) thick are inside, so please be careful to protrude from the fender or interfere with the tire house.
It can be installed if the hub center cap fits inside the hub, like the second picture shown, but it cannot be installed on vehicles with larger hub diameter (more on the front) due to the bolt to stop the cap.
Vehicle stud bolt escaping (hole) is required in the center of each bolt hole on the wheel.
The depth required for escaping is the length of the stud bolt - the thickness of the spacer.
This product cannot be attached to wheels that do not escape.
In the event that it does not escape, some people may remove the pressurized bolt on this product and use it as a pinching spacer, but please note that the customer does not remove the bolts due to its quality and strength.
Please read and follow the instructions carefully when installing this product.
This product is a high performance and high precision product made by domestic manufacturers, and is a reliable product that has undergone strength tests at domestic industrial testing facilities.
Made in Japan so please feel the strength and precision.
We are not responsible for installation contracted with the instruction manual (English language not guaranteed).
This product requires aluminum wheels.
Drum brake vehicles have a flat surface with spacers attached to the body.
All parts of the vehicle are mold manufactured to the standard. Most of the reasons that cannot be installed are due to modifications or special changes in the vehicle, so please be sure to check the listed numbers on the actual vehicle or check with a professional mechanic. (In the unlikely event that returns and exchanges are accepted by the manufacturer for an exchange or initial defects due to mistakes in our shop) Please note that all packaging materials and packaging fees are included. The hub diameter is determined by the manufacturer and the PCD, but please note that the OEM car will be the manufacturer size of the manufacturer. Example: Toyota 86 to Subaru (PCD 100-5H) size. Subaru light 4 wheels: Most of Daihatsu (PCD100-4H) sizes. ★This product is only for cars with aluminum wheels, and cannot be attached to iron wheels