【Important Note】
The hub and spacer of the car are adhered to the market, and the aluminum wheels are 73 Φ standard (displays 73.1 Φ/73 Φ) and the outer hub adhere to the surface to eliminate steering vibration.
It is a type that snaps into the wheel and the body of the vehicle. The diameter of the hub fits perfectly with the wheel, making it easy to remove the core (center).
About Materials:
Aluminum alloy ADC12 is a well-balanced alloy type which is most used in automotive parts.
Used for water pump covers, cams, cylinder blocks, chain covers, intake manifolds, transmissions, torque converter stators, foil caps, seat frames, transmission covers, power steering pumps, pistons and more.
The parameters have good balance, so it is often used for motorcycles and snowy vehicles, as well as other parts around the engine and around the cylinder.
[Precautions]
Commercial aluminum wheels for 73 Φ standard. (Original wheels cannot be mounted).
When using a long hub bolt, there are long hub bolts (0.4 inch (10 mm) long) that cannot be used with bag nuts, but in such cases, please cut it off 0.2 inch (5 mm) or use through nuts.
Bolts and nuts require a minimum of 0.4 inches (10 mm).
(Please check the length of the chewing in the actual car - 0.2 inch (5 mm)).
General rules for compatibility. Please check for yourself.
All parts of the vehicle are mold manufactured to the standard. Most of the reasons that cannot be installed are due to modifications or special changes in the vehicle, so please be sure to check the listed numbers on the actual vehicle or check with a professional mechanic. (In the unlikely event that returns and exchanges are accepted by the manufacturer for an exchange or initial defects due to mistakes in our shop) Please note that all packaging materials and packaging fees are included. The hub diameter is determined by the manufacturer and the PCD, but please note that the OEM car will be the manufacturer size of the manufacturer. Example: Toyota 86 to Subaru (PCD 100-5H) size. Subaru light 4 wheels: Most of Daihatsu (PCD100-4H) sizes. ★This product is only for cars with aluminum wheels, and cannot be attached to iron wheels