Feature

●At the same time, the product is self-adhesive and easy to use
●Suitable for graphics card memory crestline, consumer appliances, high speed hard drive, micro heat pipe radiator, high output power supply, LED industries
●It can fill the gap and effectively transfer the heat of the heating components to the heatsink
●Mat is placed between the heater and the heat dissipation component for heat transfer and insulation
●Heat conductivity, insulation, viscosity, elasticity, low heat resistance, for filling


Description

Specifications:
Item Type: Heat Transfer Pads
Size: 100 x 100 x 5mm / 3.94 x 3.94 x 0.2in
Color: Blue
Thickness Tolerance: 0.2+-0.01
Continuous operating temperature: -50 - 200 degrees Celsius
Conductivity: 1.5W /m-k
Mass resistance ratio: 10 - 12
Withstanding Voltage: 4.5 KV
Hardness: 30± 5 Shore A
Ratio: 2.05
Tensile strength: 33.1 lbs/cm2
Stretch: 48%
Flame Retardant Grade: 90V-0-1
User Manual:
1.Clean the surface. Sticks or cleans to the surface of an object to remove dust and oil.
2. Tear protective film
The left hand pinch the protective film on the side of the product with your right hand and cannot tear the protective film on both sides simultaneously, reducing the number of direct removal and area. Avoid contact with silicone sheets to avoid damage to the viscosity and thermal conductivity.
3. Fixing the heat sink
Peel off the other side protective film and then apply some pressure to the heatsink and then screw it into place.
Packing List:
1 x Heat Transfer Pad