■Plating
Developed by plating professionals.
The most mirror plating protectant ever made.
Uses: Protective plating
Volume: 3.4 fl oz (100 ml).
This is a chemical product that applies a glass film with a feeling of wax.
Chrome plated itself is a metal that is hard to oxidize but there are countless holes that are invisible and will cause rust and the plating is finally lifted. By filling the hole and coating it greatly improves the corrosion resistance.
There are many products that contain abrasives in some waxes, and the more you polish it, the more chrome plating will come off.
Also great for protecting the plating of European vehicles including benz!
Anodized plating is often used for roof rails and door malls of European vehicles, which is weak to moisture, thus in Japan the cause of corrosion (deterioration) to be faster.
When the surface is clean, you can use plating it to maintain its shine.
■Miga King
Uses: Polishing agent for chrome plating, mirror stainless steel (ultra-fine particle compound)
Contents: 6.3 oz (180 g).
The unique formula of liquid produced from NAKARAI research and development, and uses ultra-fine particulate compound, while removing dirt and dulling effectively, it is highly resistant to damage to chrome plating, and has a non-abrasive formula.
The best feature of the "Migaking" is that it clears the dirt and dullness that will lose the shine of the precious chrome plating.
How does the plating polish get scratched on the plating surface that most users worry about? "
The "ultra-fine particle compound" reduces the number of times to polish and prevent scratching the plating surface.
Polishing the plating with a polishing agent may lose its luster of the chrome plating. Therefore, it is important to reduce the number of times you polish it.
"Migaking" is formulated with ultra-fine particle compounds to ensure the effects of polishing as much as possible.
The ultra-fine particulate compound quickly removes dirt and grime and is cleaned, with a quick wipe to complete the cleaning process, so you dont have to scrub the plating surface over and over again.
How to use
Take an appropriate amount of the included "best mirror" cloth and gently polish it to your desired surface.
*Do not scrub
Precautions for Use:
■Plating
Please clean and remove dirt, dust, oil, wax, etc., on the treated surface to prevent the plating adhesion. Also, please dry thoroughly after washing.
Please follow the following precautions when inhaling steam with volatile solvents may cause poisoning.
Plating is a fireproof material. When working, make sure to ventilate and take care of fire.
Please do not spray this product.
Please use the plating as the solution is. Please note that it cannot be used if water or foreign objects are mixed in.
After fully cured, it can withstand up to 48°F (200°C), so it can be applied to motorcycle scarfs, but do not apply about 5.9 inches (15 cm) at the base of the liquid pie.
When the solvent evaporates, the reaction bonding will be completed. It can be fully cured in 3 to 5 days depending on temperature.
■Miga King
It can be used on metal, such as aluminum, steel, copper, and brass, but please understand that it is not a specialized chemical and test on an inconspicuous area before using.
Do not use on painted surfaces.
■Common information
Please read the precautions carefully before use. (Hazardous information, safety measures, first aid, storage)
Please keep out of reach of children.
Use only in well-ventilated areas.
In the event of swallowing, immediately rinse your mouth with a large amount of water and see a doctors diagnose.
In the event that it gets in your eyes, rinse thoroughly with water and consult a physician.
Wear protective gloves, protective mask, and protective glasses.
Wear long sleeve work clothes to avoid exposing skin.
Keep it away from sources of ignition such as heat, sparks, bare fires, and high temperature objects.
Do not inhae dust, smoke, gas, mist, steam or spray.
Avoid emitting into the environment.
Do not drink, do not eat, do not eat or smoke when using.
Wash your hands well after handling.
■First aid measures: If you feel uncomfortable or abnormalities while working, stop working and take a doctor to see if you are calm and not recover in a well-ventilated area.
■ Hazardous information : fear of skin irritation, fear of allergic skin reactions, flammable liquids and steam. Fear of eye irritation, fear of cancer, fear of respiratory stimulation and fear of dizziness, lung disorders due to prolonged or repetitive exposure, and continuous effects are harmful to aquatic organisms.