[Single Item]
High performance flash with stable continuous illumination that supports radio waves and wireless communication.
|
|
|
---|---|---|
High luminance guide number 60 (*1), irradiation angle 0.8 - 7.9 inches (20 - 200 mm) (*2)The guide number is 60 (*1).In addition, it supports a wide angle of 0.8 inch (20 mm) (0.6 inch (14 mm) when using a wide panel) to 7.9 inch (200 mm) telephoto (*2).Wide zoom range prevents vignetting and provides even flood light. *1 When setting 7.9 inches (200 mm), ISO 100 m (100 m) *2 35mm conversion |
Number of luminescences: 220 times (*1), Luminous intervals: 1.7 seconds (*1).The use of heat resistant materials and luminous algorithms greatly increase the resistance of overheating.The number of luminous times is 220 (*1), and the interval of light is 1.7 seconds (*1).Furthermore, using the FA-EBA1 external battery adapter for flashes sold separately, the luminous intervals are possible for 0.6 seconds (*1).Supports high-speed continuous shooting (*2) to prevent the flash from accidentally cutting without synchronous illumination. |
*1 Ni-MH battery *2 10 links per second to follow 40 continuous shotsFlashlight emitting, brightness level 1/32, when using NiMH battery.When using a DSLRs mechanical shutter |
|
|
|
---|---|---|
In addition to optical, wireless communication function is also equipped with radio waves.The radio transmission system allows for a maximum of approximately 98.8 ft (30 m) (*).Non-directional for maximum freedom of lighting even when using umbrellas or in high obstacles.It also allows stable communication even under strong sunlight. |
Wireless shooting with advanced flash function.When shooting wirelessly, attach one to the compatible camera (*) and pair the other for a commander (radio transmission side) or off-camera flash (radio wave receiver).Supports slow synchronization in wireless shooting, second curtain sync, and multi-luminous(*)In addition, the pairing system allows you to communicate without interfering with the radio waves of other devices. |
Supports multi-light ratio control for easy three-dimensional lighting.Connect up to 5 groups (*), total of 15 flashes for wireless shooting.Can be used as a wireless flash system in combination with radio compatible HVL-F45RM (sold separately), or with radio type wireless commander FA-WRC1M (Sold Separately) or non-radio compatible Sony flashes with FA-WRR1 (sold separately). * When setting group light modeUp to 3 groups when setting TTL flash mode or manual flash mode. |
|
|
|
|
---|---|---|---|
Quick shift bounce for quick change of light directionThe quick shift bounce allows the light to be moved flexibly at 90° left and right, 150° upward, and 8° downward, allowing you to quickly switch between vertical and horizontal positions.It also revises the traditional Quick Shift Bounce structure to create a smaller design suitable for most portable E-mount systems. |
Direct light setting for quick operationIndependent light level (LEVEL -/+) button allows direct and quick control of light and dimming settings.In addition, you can see the brightness level at a glance and intuitive operation on the operation screen.In addition, you can also set the brightness of other flashes that pair wirelessly to shorten your workflow. |
Custom key and TTL luminous memory function for quick call of your favorite functionsYou can assign frequently used functions to cross keys, middle buttons, and control wheels.In addition, the TTL luminescent memory function can record the amount of light when TTL luminescent.It helps simplify settings and shorten the time, such as calling on the amount of TTL luminescence, and manually adjust to suit your intentions and preferences. |
Reliable for professional photographyDesigned to be dustproof and splash-proof (*), it can be used in harsh outdoor environments.Use the Rain Guard FA-RG1 (sold separately) for added reliability.In addition, the multi-interface foot members are made of metal material for enhanced durability. * Dust-proof and splash-proof design is not completely resistant to dust and water droplets. |
|
|
|
|
---|---|---|---|
LED light and AF auxiliary lightEquipped with an LED light with a maximum illumination of 1,200 lx / 0.5 m (0.5 m) and an illumination distance of about 6.6 ft (2 m) (*1) that demonstrates power in various shooting scenes, such as indoor shooting, backlighting or outdoors.Significantly improved convenience especially when taking videos.In addition, the LED light can be used as an AF auxiliary light in dark scenes to make it easier to focus with autofocus.When the subject is dark, the AF auxiliary light emitsAF auxiliary light is also compatible with E-mount cameras (*2) *1 setting ISO3200/F5.6 when taking video *2 Not compatible with other devices.Please check the support page for compatible cameras. |
Color FilterEquipped with automatic white balance correction function that automatically corrects the color effects caused by the light in the shooting environment.In addition, the included color filter allows you to adjust the white balance to mix ambient light to achieve a natural tone. |
Bounce AdapterBy attaching the included bounce adapter, you can diffuse the flash light to create a brighter and softer atmosphere.Use with wide panels for added effectiveness. |
High speed sync functionIn traditional daytime sync, the shutter speed is limited to less than the synonymous speed of the flash, and the aperture was less than the blurring effect.The high-speed sync function lets you adjust the shutter to the full speed (*) so you can open the aperture to take pictures.The large aperture lens makes it easy to see blur portrait background.In addition, it is capable of wireless high-speed sync shooting. * Supported mechanical shutter speeds of 1/250-1/8000.Please check the specifications of the camera for the mechanical shutter speed. |
Main Specifications
Flash Specification *1 *2
Type: Auto electroflash with pre-luminous.
Shoe Shape: Multi-interface shoe
Maximum Guide Number: 2.4 inches (60 mm) (Irradiation angle 7.9 inches (200 mm) / When setting light distribution, ISO 100 m)
Operating modes: TTL/MANUAL/MULTI.
Flash Time: Within 2.8 ms (1/1 manual illumination)
Color Temperature: 5500K
Light Level Switch: 25 levels (1/1-1/256) 1/3 steps
Luminous interval: 30: 1 second - 2.5 seconds (alkaline battery) / 0.1 second - 1.7 second (NiMH battery)
Number of Emission Times: More than 150 times (alkaline batteries) / More than 220 times (NiMH battery)
Continuous luminous performance: 40 continuous shots at 10 frames per second.
Irradiation angle: AUTO/Manual (0.8 - 7.9 inches (20 - 200 mm)), covers the angle of view with 0.6 inch (14 mm) lens when wide panel is installed.
Bounce Picture:Yes
Dimmer Method: Pre-luminescent for light control (P-TTL/ADI dimming)
Multi-luminescence: Can be used in M mode of the camera body (luminous intervals: 1-100 Hz, luminous frequencies 2-100 times).
Wireless luminous:Can be used as controller, off-camera flash
Wireless light ratio control: 3 groups (TTL)
High Speed Sync Function: Flat luminescence allows you to adjust the shutter speed at full speed when combined with the Sony interchangeable lens digital camera equipped with multi-interface shoes and auto lock accessory shoes.
Test luminescence: possible by the test button
Modeling luminous:Yes
White Balance Automatic Correction Function: Yes (Except DSLR-A100)
Operating Temperature: 32°F - 104°F (0°C - 40°C).
Storage Temperature: -4°F to 140°F (-20°C to 60°C).
External Dimensions: Width 3.1 inches (78.1 mm) x Height 5.5 inches (139.5 mm) x Depth 4.1 inches (104.6 mm) Weight: 15.9 oz (449 g) (main unit only)
Power Supply: AA alkaline batteries / AAA NiMH batteries x 4
Package includes: 1 terminal protective cap, 1 mini stand, 1 case, 1 bounce adapter, 1 color filter (amber), 1 color filter (green), 1 pouch (1)
*If you want to shoot off camera with 1HVL-F42AM/F20AM in combination with an αA mount) unit, you will need an off-camera sh-FA-CS1AM (sold separately) and an off-camera cable FA-CC1AM (sold separately).* 35mm conversion focal length when equipped with 2APS-C size digital camera*3 According to Sony test requirements.*4. Normal luminescence, light level 1/32, irradiation angle 105mm, uses NiMH battery.*Requires 5 radio wireless flashes or radio wireless receiver (FA-WRR1), or radio radio wireless commander (FA-WRC1M) (sold separately).*6 Varies depending on the usage environment.*7 According to Sony measurement requirements.*Requires 8 optically-operated wireless flash (sold separately).*9 This function depends on the body being installed.