Popular with SNS. Introducing a valve ball!
When inflated it becomes an oversized bubble
When filled with water, it can also be used as an extra large water balloon.
A 2-way ball that can be played by both children and adults.
■ A soft ball that wont break even when riding!
Throw, sit, roll and play possibilities are endless!
■ Maximum diameter about 120cm!! Variable oversized ball
Fill with air and water to inflate up to 47.2 inches (120 cm).
You can also adjust the size to suit your needs.
■ Soft TPR material
Made of durable TRP material that is scratch and shock resistant, so you can ride and sit
It is tear-resistant and can be enjoyed in a variety of ways.
How to inflate
An air pump rod is included, but if it is difficult to inflate, please prepare a dedicated air pump.
1. Pull the main unit up and down to the left and right to release air from the inside.
2. Push the inlet from the inside with your finger to release the valve out.
3. Insert the tip of the pump into the air hole.
4. Inflate
5. After filling with air, push the air hole inside.
How to fill water balloons
Please prepare a cutter and hose.
1. Find the air hole.
Use a 0.8 inch (2 cm) cutter to cut slits.
3. Insert the hose.
4. Fill with water
5. After filling with water, push the air hole into the center.
Product Name: Bubble Ball
Material: TPR
Weight: Approx. 1.0 lbs (0.4
Size: Approximately 39.4 - 47.2 inches (100 - 120 cm).
Color: Blue
Includes air pump rod
Please be aware of this before purchasing.
Depending on the arrival time, the design and specifications may vary slightly.
As measurements are taken by hand, slight variations may occur.
There may be small scratches, scuffs, dirt, deformation, etc.
Instruction manual and installation instructions are not included.
● Sale only, so inquiries in handling and installation methods cannot be accommodated.
●We are not responsible for any damage or failure of other products caused by using this product.
● We are not responsible for any damage caused by accidents or installation mistakes during operation.
The color of the actual product may differ slightly from the images depending on your monitor settings, shooting locations and images.
■■About shipping costs ■■
In general, free shipping is required, but additional fees may be required for some local customers.
[Standard product]
For Tohoku (Aomori, Akita, Iwate, Yamagata, Miyagi, Fukushima), we will need an additional cost of $500 yen.
For Hokkaido, additional fees will be required for the shipping cost of 1,000 yen.
Okinawa customers will need to estimate shipping fees for 5,000 yen.
Large Product
For Tohoku (Aomori, Akita, Iwate, Yamagata, Miyagi, Fukushima), we will need an additional cost of 1,500 yen.
For Hokkaido, additional fees will be required for the shipping fee of $2000.
Okinawa customers will need to estimate shipping fees for 5,000 yen.
▲▲▲Products shipped by mail bin (Yu-Packet, etc.) do not incur additional shipping cost.