Torque Wrench for 2 wheels/4 wheels, 10.8 inches (275 mm), Insertion Angle: 0.25 inches (6.35 mm), Measurement Range: 5 - 25 Nm
A preset torque wrench that is convenient for torque management, which is often difficult to mismatch.
#1: Insertion Angle: 0.25 inches (6.35 mm), Measurement Range: 5-25 Nm
How to Use:
1. Turn the stopper on the bottom of the grip to the left to unlock and loosen the handle.
2. Turn the grip to adjust the scale to the tightening torque. *The second scale is 0.1Nm (0.010kgfm).
3. After setting the number, turn the stopper to the right and lock it so that the grip does not rotate.
Install the socket that matches the 4 bolts and nuts, check the rotational direction switch, and insert it firmly into the bolt or nut, and tighten it.
5. When the torque is reached, the ratchet base will have a bent feel. Then immediately remove pressure and complete the tightening.