Feature●2 Channel Active DI Box●Convert line signals / speaker signals / high impedance signals and more to a balanced low impedance signal●Flat sound quality●This product is an imported product, so there may be cases of crushed boxes, but this is not a problem. No returns or exchanges due to crashed boxes●This is a domestic import product. Comes with a 1 year warranty against the date of purchase. You will be supported by an authorized reseller even after the free warranty periodDescription
Dual XDirect is a 2-channel specification,
Line signal and speaker signal
High impedance signal etc.
Balanced and low impedance signal
This is a direct box to convert.
The sound quality is flat and cleanly mixers and
Sends to the recorder
Cuts high frequency bands
Equipped with a low pass filter,
Reduces external noise caused by radio waves.
Not only does it work with live PA, DJ, recording, etc.
PC centric personal recording environment
Also recommended as an input device.
Features:
- Active type, so musical instrument tones
It has a wide frequency characteristics that do not compromise - 1/4" TRS/XLR combo connector input
It is equipped to support a wide range of input sources. - Equipped with an attenator to reduce input signals. (-30dB)
- The phantom power supply (18V - 48V),
Supports both 9V batteries (about 100 hours with alkaline batteries). - Ground Lift Switch
It also addresses issues such as ground noise. - For Tour Use
Durable aluminum case.
Specifications:
- Frequency Response: 10 Hz - 100 kHz, +/- 0.5 dB @ +0 dBu
- THD: <.05% (typical)
- Dynamic Range: >100 dB (typical)
- Channel Separation: > 80 dB (typical)
- Maximum Input Level: +4, +34 dBu
- Maximum Output Level: +6 dBu (battery powered),
+14 dBu (phantom powered) - Input Connections: 1/4" TRS | XLR female balanced / unbalanced (2), 470k Ohm
- Thru Connections: 1/4" TRS (2)
- Output Connections: XLR male balanced (2), <600 Ohm
- Input Attenuation: Switchable, (0, -30 dB)
- Power Requirements: 9V @ 7.5 mA (battery, alkaline recommended),
18 - 48V DC @ 6.4 mA (phantom power per channel) - Dimensions (DWH mm): 3.9 x 4.6 x 1.8 inches (99 x 117 x 47 mm)
- Weight: 0.38 kg