[8Ω]

[16Ω]

Proudly made in Palmar Germany by professional direct boxes and speaker simulators.
The PDI-06 is a power attenator that can reduce the volume by a minimum of 18% by connecting between the guitar amplifier and speaker.
The natural drive sound can be achieved when the vacuum tube amplifier is turned up at a low volume.
You can play at the optimum volume for the environment, such as stage, studio, home, etc.
5 levels of 70%, 50%, 35%, 25%, 18% volume. When set to "LOAD BOX", it acts as a dummy load, and can be used for lines and recordings that do not use speaker cabinets.
Passive type (no power supply or battery required)

Note:
The volume percentage display is above the numeric and may differ from the feeling of auditing.
Please check the output resistance value of your amplifier (number of ohms) before using. If used in wrong combination, it may cause damage.
This product uses a dummy load function for heat consumption, so the main unit will be at high temperature. To prevent heat breakage, please use heat as needed such as heat dissipation away from the peripheral equipment or with a cooling fan.

■Specifications
Maximum Input: 120W
Supported impedance (amplifier side, speaker out): 16 ohms
Input terminal (amplifier end): 0.25 inch (6.3 mm) mono
Output terminal (speaker end): 6.3mm mono x 2 (parallel output)
Control: 70%, 50%, 35%, 25%, 18%, LOAD BOX